2015-6-1  SECTION 03200 CONCRETE REINFORCEMENT . PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Requirements for providing concrete reinforcement as shown and specified herein. Reinforcement includes all steel bars, wire and welded wire fabric as shown and specified. B. Related W ork Specified in Other Sections Includes: 1. Section 03100 - Concrete ...

SECTION 03200 – CONCRETE REINFORCEMENT -

2016-2-3  SECTION 03200 CONCRETE REINFORCEMENT PART 1 GENERAL 1.01 DESCRIPTION A. This Section includes furnishing materials and installation of concrete reinforcement as indicated on the Drawings and/or specified herein. B. Related Work: The following items of related work are specified in other sections. 1. Section 03100: Concrete Formwork 2. Section ...

2017-3-29  SECTION 03200 CONCRETE REINFORCEMENT PART 1 - GENERAL 1.1 DESCRIPTION A. Scope 1. Furnish and install steel bars, steel wire and wire fabric required for the reinforcement of concrete B. Additional Requirements Specified Elsewhere 1. Section 01010: Summary of Work 2. Section 01340: Shop Drawings, Product Data, and Samples 3.

HCSS 03200-1 February 2019 SECTION 03200 CONCRETE REINFORCEMENT PART 1 GENERAL 1.01 SECTION INCLUDES A. Reinforcing steel bars, wire fabric or rod mats for cast-in -place concrete. B. Support chairs, bolsters, bar supports, and spacers for supporting reinforcement. 1.02 REFERENCES

2020-3-16  SECTION 03200 CONCRETE REINFORCEMENT 03200.01 GENERAL A. Description Concrete reinforcement shall include, but not necessarily be limited to, furnishing and placing various types and/or sizes of steel reinforcing for embedment in Portland cement concrete as specified in the Contract Documents. B. Related Work Included Elsewhere Not applicable.

2016-3-1  LHC 03200-3 1.4 Delivery, Storage and Handling A. Store steel reinforcement blocked-up off the ground and in orderly stacks. B. Store only bars with the same identifying label in the same stack. 1.5 Testing A. Perform at the mill for each heat. B. Submit certified test results to Engineer upon request. PART 2 - MATERIALS 2.1 Reinforcement Bars, Ties, and Stirrups

2020-8-19  19035301 03200-1 SECTION 03200 CONCRETE REINFORCEMENT . PART 1 GENERAL . 1.01 QUALITY ASSURANCE . A. Perform concrete reinforcement work in accordance with CRSI Manual of Standard Practice, Documents 63 and 65. B. Conform to ACI 301 and 318. PART 2 PRODUCTS .

2019-8-5  Concrete Reinforcement 03200-1 December 2015 SEPTA Design GEC 14F-01 Media Rock Slope Stabilization 100% Design SECTION 03200 CONCRETE REINFORCEMENT PART 1 GENERAL 1.01 DESCRIPTION A. The work specified in this Section consists of furnishing and installing reinforcement for concrete structures. All reinforcement shall be

03200-1 of 9 Published: 01/01 Revised: SECTION 03200 CONCRETE REINFORCEMENT 3200.01 GENERAL A. Description Concrete reinforcement shall include, but not necessarily be limited to, furnishing and placing various types and/or sizes of steel reinforcing for embedment in Portland cement concrete as specified in the Contract Documents.

2004-4-22  SECTION 03200 CONCRETE REINFORCEMENT PART 1--GENERAL 1.01 DESCRIPTION This section specifies reinforcing steel for use in reinforced concrete. 1.02 QUALITY ASSURANCE A. QUALITY CONTROL BY CONTRACTOR: To demonstrate conformance with the specified requirements for cast-in-place concrete,

HCSS 03200-1 February 2019 SECTION 03200 CONCRETE REINFORCEMENT PART 1 GENERAL 1.01 SECTION INCLUDES A. Reinforcing steel bars, wire fabric or rod mats for cast-in -place concrete. B. Support chairs, bolsters, bar supports, and spacers for supporting reinforcement. 1.02 REFERENCES

2017-3-29  SECTION 03200 CONCRETE REINFORCEMENT PART 1 - GENERAL 1.1 DESCRIPTION A. Scope 1. Furnish and install steel bars, steel wire and wire fabric required for the reinforcement of concrete B. Additional Requirements Specified Elsewhere 1. Section 01010: Summary of Work 2. Section 01340: Shop Drawings, Product Data, and Samples 3.

2016-3-1  LHC 03200-3 1.4 Delivery, Storage and Handling A. Store steel reinforcement blocked-up off the ground and in orderly stacks. B. Store only bars with the same identifying label in the same stack. 1.5 Testing A. Perform at the mill for each heat. B. Submit certified test results to Engineer upon request. PART 2 - MATERIALS 2.1 Reinforcement Bars, Ties, and Stirrups

2004-9-15  SECTION 03200 CONCRETE REINFORCEMENT PART 1 GENERAL 1.01 QUALITY ASSURANCE A. Codes and Standards: Comply with the following codes, specifications, and standards, except where more stringent requirements are shown or specified: 1. ACI 117/117R-90 Tolerances for Concrete Construction and Materials. 2. ACI 301-89 Specifications for Structural ...

SECTION 03200 CONCRETE REINFORCEMENT PART 1 – GENERAL 1.01 SECTION INCLUDES A. Reinforcement bars for cast-in-place concrete 1.02 RELATED SECTIONS A. Concrete Formwork: Section 03100. B. Cast-in-Place Concrete: Section 03300. 1.03 QUALITY ASSURANCE A. Codes and Standards: Comply with provisions of the following standards, except where ...

03200-1 ADDENDUM THREE SECTION 03200 CONCRETE REINFORCEMENT PART 1 GENERAL 1.1 DESCRIPTION A. Furnish and install steel reinforcement for all cast in place concrete required by these Contract Documents. The Work includes but is not limited to reinforcing steel, supports,

SECTION 03200 CONCRETE REINFORCEMENT

11015.51 03200-1 ARRO E.WHITELAND TWP. –Frame Ave Culvert Wall Replacement (PennBid) SECTION 03200 CONCRETE REINFORCEMENT PART 1 - GENERAL 1.01 SECTION INCLUDES A. Reinforcement bars for cast-in-place concrete B. Mechanical Splice Coupler 1.02 RELATED SECTIONS A. Concrete Formwork: Section 03100. B. Cast-in-Place Concrete: Section 03300.

2011-10-19  SECTION 03200 CONCRETE REINFORCING PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for concrete reinforcing. 1.02 REFERENCE STANDARDS A. American Concrete Institute (ACI): 1. 301 Specifications for Structural Concrete for Buildings. 2. 315 Details and Detailing of Concrete Reinforcement. B. ASTM International (ASTM): 1. A82 ...

03200-1 TECHNICAL SPECIFICATION ITEM 03200 CONCRETE REINFORCEMENT 1.0 GENERAL 1.1 SCOPE This section gives requirements for concrete reinforcement. Coordinate the requirements of this section with all other sections of Division 3 - Concrete. 1.2 REFERENCE STANDARDS

2008-6-19  2002-07-04 Concrete Reinforcement Use this Section to specify concrete reinforcement for large scope (e.g. more than $25,000) cast-in-place concrete work except:.1 Concrete reinforcement for sidewalks, driveways, aprons, pads, curbs and gutters, specified in Section 02771 - Concrete Paving, Curbs and Gutters.

2018-1-18  CONCRETE REINFORCEMENT 03200 - 1 SECTION 03200 CONCRETE REINFORCEMENT PART 1: GENERAL 1.01 STANDARD REQUIREMENTS This Section of the Specifications covers the furnishing, bending and place-ment of all reinforcing steel, welded wire reinforcement, supports and fastenings used in the concrete work.

11015.51 03200-1 ARRO E.WHITELAND TWP. –Frame Ave Culvert Wall Replacement (PennBid) SECTION 03200 CONCRETE REINFORCEMENT PART 1 - GENERAL 1.01 SECTION INCLUDES A. Reinforcement bars for cast-in-place concrete B. Mechanical Splice Coupler 1.02 RELATED SECTIONS A. Concrete Formwork: Section 03100. B. Cast-in-Place Concrete: Section 03300.

2010-12-30  03200 - 1 03200 - CONCRETE REINFORCEMENT PART 1 - GENERAL 1.01 SUMMARY A. The work covered by this section includes all materials, labor, accessories, equipment, permits and related services to furnish and pl ace all reinforcement in cast-in-place concrete construction, as shown on Drawings, as specified herein, and all required accompanying

2020-3-12  Section 03200 CONCRETE REINFORCEMENT Page 1 of 2 City of Prince Albert Master Specifications 1.0 GENERAL 1.1 Requirements .1 Cooperate and coordinate with the requirements of other units of work specified in other sections. 1.2 Work Included .1 This section specifies requirements for supplying and placing reinforcing

2018-11-16  SECTION 03200 (03 20 00) CONCRETE REINFORCEMENT. PART 1 GENERAL. SECTION INCLUDES. Reinforcing steel bars, wire fabric and accessories for cast in-place concrete. REFERENCES. ACI 301 Structural Concrete for Buildings. ACI 318 Building Code Requirements For Reinforced Concrete. ACI SP 66 American Concrete Institute Detailing Manual

2018-11-16  DIVISION 3 – CONCRETE Section Title Name NAU Technical Standards – Division 3 (09/11/09) 03000 CONCRETE - GENERAL 03100 CONCRETE FORMWORK 03130 Permanent Forms Prefabricated Stair Forms . 03200 CONCRETE REINFORCEMENT. 03210 Reinforcing Steel . 03240 Fibrous Reinforcing . 03250 Concrete Accessories . Anchors and Inserts

2013-4-11  SECTION 03200 CONCRETE REINFORCEMENT JACKSON TYLER NORRIS MEMORIAL SKATE PARK CITY OF BUDA, TX 03200 - 1 PART 1 - GENERAL 1.01 DESCRIPTION: Provide steel reinforcement for cast-in-place concrete. 1.02 RELATED WORK SPECIFIED ELSEWHERE: A. Section 03100-Concrete Formwork

B. Section 03200 Concrete Reinforcement. C. Section 03250 Concrete Accessories. D. Section 03300 Cast In Place Concrete. E. Section 03355 Exposed Aggregate Concrete Finish. 1.03 REFERENCES A. ACI 117 Standard Specifications for Tolerances for Concrete Construction and Materials. B. ACI 301 Structural Concrete for Buildings.

2020-6-25  03200-1 11/19 SECTION 03200 CONCRETE REINFORCEMENT PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and General Provisions of Contract, including General Conditions and other Division 1 Specification Sections, apply to the Work of this Section. 1.02 RELATED WORK Section 03300: Cast-in place concrete. 1.03 QUALITY ASSURANCE

2016-5-13  03200 - 1 of 2 SECTION 03200 - CONCRETE REINFORCING PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Reinforcing bars, wire fabric, and accessories for cast-in-place concrete. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements. 1.2 REFERENCES A. ASTM International (ASTM): 1.